Elumedo
Dining Table Pendant Light - 127 cm Oak Beam - Handcrafted One-of-a-Kind
Dining Table Pendant Light - 127 cm Oak Beam - Handcrafted One-of-a-Kind
Couldn't load pickup availability
Handcrafted oak branch lamp
A naturally shaped unique piece
Key data
- Length: 127 cm
- Recommended table length: 157–167 cm
- LED strip with sensor dimmer (contactless)
- Warm light (2,700K)
- White mottled textile cable
Description
This historic beam bears a striking structure that has grown over decades.
The result is a sculptural design object with a unique character that tells the story of the tree through time and weather, creating a special atmosphere. With its original aesthetics, it sets an accent in the room.
Further data
- Heat-treated: guaranteed pest-free.
- Coating protects and reduces darkening
- Weight: <5.0 kg
- Branch color: medium-light brown tone
- Rope suspension: Length 150cm for room heights up to 3.0m height adjustable.
- White three-point cable suspension
- Canopy made from oak wood
- LED strip: Brightness: 1,671 lumens; output: 14W; CRI: 90; beam angle: 120°; LED strips replaceable
Surface finish
The surface has been cleanly finished using special processes and elaborately refined with natural materials. This creates a pleasant feel and a high-quality finish.
Dimmer
The luminaire has a dimmer at the beginning of the LED strip. This works without contact.
As long as the hand is held in front of the dimmer, the brightness is changed continuously from 0 to 100%. With each new hand movement, the direction of dimming changes to brighter or darker. A quick, "wiping" movement of the hand under the dimmer switches the light off.
If the luminaire is switched off using the wall light switch, the dimmer remembers the last brightness setting.
The dimmer is not compatible with other dimmers, such as those built into the light switch.
Adjustments
The following can be changed on request. (Please contact us before ordering)
- Cable color: freely selectable
- Color of cable suspension and canopy: black or white
- Longer cable suspension for higher ceilings
Warnings and safety instructions
Warnings and safety instructions
This light is a natural product. Despite careful crafting and inspection, the odd sharp spot or splinter may remain and could cause injury.
Please check the light for such spots when unpacking it and before installation. Handle it with care and, if necessary, wear suitable clean gloves to avoid injury.
Install the light at a suitable height and position so that there is enough clearance – especially at head height – and nobody can bump into it.
About our lights
About our lights
Our lights are more than just light sources - they are a style element, an accent that brings naturalness into the style of your home. With their beautiful light and natural shape and structure, they become an eye-catcher in any room.
Each of our lights is a unique piece, made with great attention to detail. Every branch we use is a selected find from regional forests. The surface is the result of weathering. Furrows, wormholes and differences in color can occur and are also part of what gives it its authentic charm and tells a story.
We manufacture our lights by hand in our workshop. Every step is carefully executed to ensure high quality.
About Elumedo
About Elumedo
We are a small start-up company from the beautiful Sauerland region in the middle of Germany. We put our passion for our work into every single product. We are proud to use local woods and work closely with our regional cooperation partners. Our aim is to continuously work on the development of new models, variants and technologies. Each of our lights should combine aesthetics and function. We attach particular importance to preserving the naturalness of our branches. Each branch tells its own story and represents a work of art in its uniqueness.
Contact us
Contact us
If you have any questions or are unsure which of our products best suits your needs, please do not hesitate to contact us. We are always available by phone, WhatsApp and SMS (+49 1515 0575968) as well as by email (info@elumedo.de) and will be happy to help you.
Luminaire no.
SKU:565124

Tips for choosing the right light
Which branch length suits my table?
When choosing the branch length, consider safety, appearance and how well the table will be lit.
To make sure nobody bumps their head on the end of the light, the branch should stop a little short of the table edge on each side. For tables under 200 cm long, we recommend a gap of 15 to 20 cm on each side, so the branch is 30 to 40 cm shorter than the table. For tables of 200 cm or longer, we recommend 20 to 30 cm on each side, so the branch is 40 to 60 cm shorter than the table.
The branch should not be much shorter than that, so that the ends of the table are still well lit and the branch stays in proportion to the table.
How high should the light hang above the table?
We recommend hanging the light about 70 cm above the tabletop. At this height, the whole table is lit evenly and the light looks well balanced. If it hangs higher, the light may dazzle some people, depending on how tall they are.
Our guide explains what to consider with high ceilings and long tables.
How bright is the light?
The LED strip emits 1,430 lumens per meter at a beam angle of 120°. The dimmer lets you adjust the brightness smoothly. For comparison: a traditional 75 W incandescent bulb produces around 900 lumens, spread in all directions.
Can the pendant light illuminate the whole room?
With its 120° beam angle, the light does not dazzle, but it also does not reach the side walls or the ceiling. To light the whole room, you will therefore need additional lights.
If we make a light to order for you, we can also fit it with a second LED strip that shines up toward the ceiling.
Alternatively, a floor lamp is often enough to light the whole room – depending on your taste and the brightness you want.
Questions about the light
Can I use a dimmer switch?
The dimmer built into our light is not compatible with other dimmers, such as a wall dimmer switch. If you would like to keep using your wall dimmer, please let us know before you order so that we can remove the dimmer from the light.
How does the suspension work?
Each light hangs from two or three wire suspensions.
Each suspension consists of (see illustration):
1. the attachment on the branch
2. the suspension wire (steel)
3. the attachment on the ceiling, known as the ceiling bracket.
The ceiling bracket contains a so-called gripper, which lets you shorten or lengthen the wire. At first, the end of the wire sticks out of the ceiling bracket. Once the final height has been set, the wire is trimmed and the end disappears into the bracket.
Can the height be adjusted later?
The suspension is not designed for the height to be changed again and again. Instead, the height is set once. We recommend testing the ideal height over several days first and adjusting it if necessary. Once the final length of the wire has been decided, the wire is trimmed. After that, the height of the light stays as it is.
What length of power cable do I need to reach the electrical box in the ceiling?
The total length of the power cable is made up of two sections:
1. From the branch, along the thin suspension wire, up to the ceiling.
2. From there, along the ceiling to the electrical box, where the canopy is also mounted.
An electrician can shorten the cable later. So please work out the maximum cable length you need carefully before you buy, and add about 10% as a reserve.
When shortening the cable, make sure the + and − wires are connected with the correct polarity.
How can I run the power cable along the ceiling to the canopy or the electrical box?
If the power cable has to run from the suspension wire to the cable outlet in the ceiling, it can be secured with small, discreet cable clips in white or black.
If you would like us to supply these clips, please contact us before ordering your light.
Installation questions
How do I install the light on the ceiling?
To mount the light on the ceiling, you first need to mark the mounting points accurately. We supply instructions with all the measurements for your individual light, so you can proceed step by step. For lights with three suspension points, you also receive an exact drilling template.
Can the canopy be hidden in the ceiling?
The canopy not only connects the light's cable to your home's wiring, it also houses the power supply (LED driver), which converts the line voltage into the 12–24 V the LEDs need.
With suspended or drywall ceilings, the power supply can be hidden in the space above the ceiling. In that case, you or your electrician can get a cover with a cable outlet from us, which replaces the canopy. Please get in touch to discuss the details.
How do I attach the light to a sloped ceiling?
The ceiling bracket works without restriction on sloped ceilings up to about 45°. If your ceiling is steeper, or you do not like the look of the angled bracket, please contact us and we will find a custom solution together.
What if I have a high ceiling?
The steel suspension wires are available in any length. On lights already in our store, the power cable can be extended in some cases – there are various ways to do this. If you need more than the stated length, please contact us before ordering.
What if there are beams on my ceiling?
Beams above the spot where you want to hang the light are not a problem. If one of the mounting points falls exactly on the edge of a beam, move all the light's suspension points about one centimeter to one side, so that this mounting point sits either on the beam or next to it. In that case, the table position also needs adjusting so that the light is centered over the table again.
When does the light's weight become a problem with suspended or drywall ceilings?
How much weight a suspended or drywall ceiling can carry depends on its material and construction. The light's weight is spread across its mounting points. You will find the weight of each light in its product description.
As a rule, the weight of our lights is not a problem. If you are planning to buy a particularly large light and are unsure whether your ceiling can carry it, we recommend asking a qualified professional on site, who can advise you and find a solution if needed.